Alt-BEAM Archive
Message #12866
To: beam@sgiblab.sgi.com beam@sgiblab.sgi.com
From: Sathe Dilip sathe_dilip@bah.com
Date: Saturday, April 01, 2000 3:24 AM
Subject: Re: uCore and bicore
>I suspect the spike is getting through the power supply. Try decoupling
>the IC with a 0.1 uF ceramic capacitor in parallel with an electrolytic
>of 10 uF. Keep leads as short as possible.
>
>Dilip
>
>Andrew Hooper wrote:
>SNIP
>>
>> Now wisker i setup is connected to pin 1 of the 74c14 also there is a
>> resistor going to ground (10meg), the circut seems to be functioning
>> correctly, and im getting some interesting feedback from the wisker
>> but whatever change is made happens also to 2a.
>>
>> | 1a | 1b | 2a | 2b |
>> | 1 | 0 | 1 | 0 | on
>> | 0 | 1 | 0 | 1 |
>> Cycles with 80/20% Duty Cycle.
>>
>> Do i need to seperate both of the NV's so that they opperate
individually?
>
>----------------------------------------------------------------------
>The early bird may get the worm, but the second mouse gets the cheese.
>----------------------------------------------------------------------
Home