Alt-BEAM Archive
Message #12658
To: beam@sgiblab.sgi.com
From: sebastiaan van Vliet sebastiaan_van_v@hotmail.com
Date: Mon, 27 Mar 2000 13:55:57 -0500
Subject: Re: Allmost complete walker. still not working
>
>
> >From: "Jim Taylor"
> >Reply-To: beam@sgiblab.sgi.com
> >To:
> >Subject: Re: Allmost complete walker. still not working
> >Date: Sun, 26 Mar 2000 17:35:50 -0500
> >
> >what are your resistor values?
> >
> Just the same as on Ians page. Maybe you could help me with this one: How
do
> I turn down the frequency of the bicore? Somebody advised me to replace
the
> ones on the side, but they only seem to influence the delay between the
> master ans the slave.
> > >
> > >
> >
>
> ______________________________________________________
>
12659 Mon, 27 Mar 2000 13:58:34 -0500 Re: Charging NiCads Sathe Dilip
> For a normal charging cycle, charge them for about 14 hours at 1/10th of
> the Ampere-Hour capacity.
>
> In your example, charge at 60 mA for 14 hours. If your batteries are
> rated for a fast charge, you can charge them with more current with a
> proportionately less time.
>
> Dilip
> ---------------------------------
>
> Andrew Hooper wrote:
>
> > Been a long time since I built my last charger, and I cant remember
> > what the rule of thumb was in regards to voltage and current.
> >
> > The pack I have consists of 4 X 1.2v 600ma cells in series.
> >
> > Any ideas or thought?.
>
> ----------------------------------------------------------------------
> The early bird may get the worm, but the second mouse gets the cheese.
> ----------------------------------------------------------------------
>
Home