Alt-BEAM Archive
Message #11617
To: beam@sgiblab.sgi.com
From: Meabadboy@aol.com
Date: Sat, 11 Mar 2000 16:45:40 EST
Subject: [alt-beam] Re: Pager Motor (slotcar motors)
In a message dated 3/11/2000 4:37:50 PM Eastern Standard Time,
BUDSCOTT@aol.com writes:
<< Hey, just how good do slot car motors work with beam, I gotsa bunch a slot
cars, with small gears, would they work well? >>
12 volt ~ high amp ~ dont know ~ but i dought it ~ I also have alot of them `
but I dought the low voltage will work with them
11618 Sat, 11 Mar 2000 17:59:46 EST [alt-beam] Re: ARGGGGHH!!!! beam@sgiblab.sgi.com BUDSCOTT@aol.com Go to beam-online.com and look at the almost complete walker schematic. I put
the photodiodes and 1M resistors to the two red resistors on the circuit, or
the 1.5M resistors. What i have now is like the BEAMant circuit, with the
photodiodes connected to the master timing resistor, still don't work!
-Spencer
11619 Sat, 11 Mar 2000 18:08:21 EST [alt-beam] walker beam@sgiblab.sgi.com "Cory Houck" Hi
I have just finished my first free form photovore and now i want to
build my first walker I want to know once I build the the biocore do I have
to biuld anything else or can i just hook the motors and the batteries up
and have a walker?? {its going to be a two moter walker}
I am going to do the one at Ian's website under tutorials "how do do a free
form bicore"
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
Home