Alt-BEAM Archive
Message #10571
To: beam@sgiblab.sgi.com
From: "Mike Kulesza" mikekulesza@hotmail.com
Date: Mon, 21 Feb 2000 12:56:53 GMT
Subject: [alt-beam] Re: walker - a bit better
ooops - meant series (sorry) 2 x 3V = 6V
>From: SG
>Reply-To: beam@sgiblab.sgi.com
>To: beam@sgiblab.sgi.com
>Subject: Re: walker - a bit better
>Date: Sun, 20 Feb 2000 21:35:03 -0600
>
>At 03:02 AM 2/21/00 GMT, you wrote:
>put in parallel for 6V total. What do
> >you think?
>
>try put them in series?
>-Sparky
>
______________________________________________________
10572 Mon, 21 Feb 2000 05:28:15 -0800 (PST) [alt-beam] Re: Direct-Drive LCDs beam@sgiblab.sgi.com Lee Golden BGMicro still has the part -- see:
http://bgm.bgmicro.com/prodinfo.asp?prodid=ACS1077
Lee
--- Victor Snesarev wrote:
> Does anyone know of a source of direct-drive LCD's
> (the ones used by Lee
> Golden to make LCD name tags
>
http://www.geocities.com/leemon1/Bots/LCD/lcdname.htm
> )?
>
> I checked BGMicro's catalog and they don't have any.
> I searched the web,
> and found Optrex Corp., but there's no ordering or
> contact info.
>
> If anyone has any lying around, I would like to
> purchase up to 10 of
> them. Please, contact me in private by e-mail, if
> you are willing to
> sell some.
>
> Best regards,
>
> Victor
>
>
__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com
10573 Mon, 21 Feb 2000 11:26:52 -0400 (GMT-0400) [alt-beam] Photovore and FLED SE beam@sgiblab.sgi.com Venturino Carmelo Miranda Paulino Hi there.
Has someone made a photovore with a FLED SE?
I,m trying to make one, will be my second project, the first one was a
sollar roller, but I don't know too much about
electronics. Can anyone help me with this?
******************************************
** VENTURINO MIRANDA **
** Facultad de Ingenieria **
** Escuela de Ingenieria Quimica **
** Grupo: F.I.R.P. **
** U.L.A. Merida - Venezuela **
******************************************
Home