Alt-BEAM Archive
Message #04771
To: beam@corp.sgi.com
From: Jason - evenflow88@hotmail.com
Date: Tue, 22 Jun 1999 12:18:29 GMT
Subject: [alt-beam] Hextile walker
Hie all, i just built a walker using tilden Hx1.0 board.....i even took a
photo of it and hope t publish it soon..to tell u the truth it is really
hard making another copy of tilden's work..i need to visit the PCB company
twice just to get it done....well after wiring all the input resistor and
all...the core worked fine(single process running) but after i wire the
servo in...it goes haywire, so before i try it can anyone assure me that
mounting another cap across the servo might work...well i did use a 10uF cap
across both chip that is the 74hc14 and 74hc245 but i tested the core
running without the 10uF cap it goes haywire too...well so i think i will
stick to the 10uF..another thing is can anyone tell me how to read the codes
on a normal cap to determine its value ,codes like 103,104,106 and
etc....thanks a lot ...
p/s:i would like to know which group gives more power a
74AC245,74hc245,74hct245,74ls245 or a 74als245 ....thanks
______________________________________________________
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/alt-beam
http://www.egroups.com
- Simplifying group communications
Home