Alt-BEAM Archive
Message #04412
To: evanhk@interchange.ubc.ca
From: JVernonM@aol.com
Date: Thu, 10 Jun 1999 08:10:17 -0700
Subject: Re: SE questions not found in the FAQ.
> In a message dated 6/9/99 11:35:31 PM Eastern Daylight Time,
> evanhk@interchange.ubc.ca writes:
>
> >
> > Well, that's the fun of it... think of the chip as many individual
> > components, then you'll be able to envision and build the circuits.
The
> > best way to learn would be to check out the data sheets. (That way, if
> > you're freeforming, you can build it like you want it to be too). When
> > looking at the bicore "component schematic", you can practice redrawing
> that
> > into a "regular schematic", then you'll get the hang of it.
> Hi Evan,
> Yes, I understand the chip specs. I just thought it would be easier for
the
> novice. BEAM as a starting point hobby and all that. Besides, I'd rather
be
> up to my elbows in caps and motors while sniffing solder fumes. Any short
cut
> to building is fine with me. Thanks for the advice just the same.
> Jim
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/alt-beam
http://www.egroups.com
- Simplifying group communications
Home