Alt-BEAM Archive
Message #04282
To: beam@sgiblab.sgi.com
From: Jason - evenflow88@hotmail.com
Date: Sat, 05 Jun 1999 06:50:33 GMT
Subject: [alt-beam] Re: BEAMAnt Schematic corrections(tips)
>From: "Jean auBois"
>Reply-To: beam@sgiblab.sgi.com
>To:
>Subject: BEAMAnt Schematic corrections
>Date: Sat, 5 Jun 1999 00:19:20 -0600
>
>
>----- Original Message -----
>From: Jason -
> >we are getting quite confused here...on your website...mark posted his
> >beamant article in the teluride meeting...that article has a picture of a
> >topology of mark's beamant...on the left motor there is a two diode put
>back
> >to back....how can u explain this though the hand drawn schematics is an
> >error on it.....care to explain this jeean...thanks(i am just
> >suggesting...no offence)
>
>
>Because the tip-to-tip arrows on the Telluride handout are hand drawn, and
>done so only on the motor in question. I believe it is an indication that
>the motor can turn both ways, that it is XOR driven. You will notice that
>there is no line perpendicular to the tips, ergo the arrows are NOT
>diodes -- Tilden is perfectly able to draw diodes when that is what he
>intends. There are quite a few other arrows on the Telluride handout, and
>no one is supposing them to be diodes, are they?
>
>In a lot of ways, Chiu's drawing is still the most accurate.
>
>
>jab
Hie
i would like to know whats 'XOR driven' havent come across this word
before and a FET too...thanks
jason
______________________________________________________
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/alt-beam
http://www.egroups.com
- Simplifying group communications
Home