Alt-BEAM Archive
Message #04059
To: dave@solarbotics.com
From: "Jason -" evenflow88@hotmail.com
Date: Mon, 31 May 1999 16:19:39 GMT
Subject: [alt-beam] Re: Mark T Graphic
>From: Dave Hrynkiw
>To: "Jason -"
>CC: beam@corp.sgi.com
>Subject: Re: Mark T Graphic
>Date: Mon, 31 May 1999 08:51:22 -0600
>
>At 01:29 AM 5/31/1999 , Jason - wrote:
>>Hie i would like to know if mark make his own PCB or do he send it to a
>>company to specially fabricate for him
>
>He designs them and gets them fabbed out at a professional shop.
>
>>....and does anyone has a good idea for me to start in designing my own
>>PCB layout what program to be used and such ......
>
>It's not easy to slap together a decent PCB, but don't let that get you
>discouraged. I started with the Protel 2.8 demoware we have available on
>our website. Good for up to 100 pins - well within most BEAM designs.
>
well you see.. i did download that version on your website which i had
plenty fun designing but after doing so...i cant out the art work and the
only thing i can print out is the one that fits onto the page which is too
big ...any hints here on sizing it smaller or bigger before printing the
finished work out...and after printing it out i just use a simple component
like lets say a DIP14 chip and measure it with the printed circuit,...any
other simpler technique than this one...well thanks again and sorrie for all
the troubles
______________________________________________________
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/alt-beam
http://www.egroups.com
- Simplifying group communications
Home