Alt-BEAM Archive
Message #03764
To: jester96beam@iname.com
From: "Jason -" evenflow88@hotmail.com
Date: Wed, 26 May 1999 13:53:43 GMT
Subject: [alt-beam] Re: Bicore Troubles
>From: jester96beam@iname.com
>Reply-To: jester96beam@iname.com
>To: beam@corp.sgi.com
>Subject: Bicore Troubles
>Date: Tue, 25 May 1999 08:31:17 -0400 (EDT)
>
>I started building a bicore head. So far I just have it bread boarded. For
>som reason it doesn't track like very well at all. If I hold it facing a
>light, then turn it either way, it will always turn the SAME way. Then it
>will stop within 45 degrees of facing the light. I am just using the ciruit
>for the head on Ian's page, only I am using .22uF caps, a servo, the IR
>photodiodes from SE, and I have a .1uF cap across teh power pins of the IC.
>
>Chris
try putting it in series cause when i used a servo i faced this problem
too...in series as in cathode to cathode....and can i get those gearmotors
from u....which u said cost 14.50 and have a RPM of 15?or am i wrong which
is pretty strong if u ask me..let me know where i could get some from u or
which shop ?..thanks
jason
______________________________________________________
------------------------------------------------------------------------
eGroups.com home: http://www.egroups.com/group/alt-beam
http://www.egroups.com
- Simplifying group communications
Home