Alt-BEAM Archive

Message #02713



To: beam@corp.sgi.com
From: davidperry@mail.geocities.com
Date: Mon, 27 Apr 1992 13:50:10 +0000
Subject: [alt-beam] re: walker problems and anti-gravity


it is proven to work, but your right, most of the lift comes from the
balloon, the coil (mind you it would be quite powerful)
gives it just that little bit to get into the air.
David Perry
> From: Dennison
> To: davidperry@mail.geocities.com
> Subject: Re: walker problems and anti-gravity
> Date: Thu, 22 Apr 1999 07:27:04 -0400

>
> Thats hardly what you would call an 'ingeneous' idea. The 'anti-gravity'
> comes 99% from the helium balloon. Which isn't anti-gravity at all. Infact,
> Helium ballons rise BECAUSE of the presence of gravity. The 'coils' here
> will probably produce a neglible effect. If anyat all. The earths mag-feild
> really is weak. Remeber hoverboards from back to the future? Ain't happning.
>
> Dennison
>
>
> first, i can't get my 2 motor walker to work, the leds lit up before
> i connected the H-bridges but now only one lights up when i hold the
> PIN. There is voltage going to the LEDS but it doens't appear to be
> changing, there is also a small amout of voltage going to the motors.
> Any ideas?
> Next i just saw the article on making and anti-gravity craft that
> works, it has a helium ballon wrapped with coils, making the craft
> just heavier than air, when 200volts (very low current) is put
> through the coil it rises to repel earths magnetic field. So the
> whole ballon drifts into the air, any1 have ideas on how to make this
> into a beam robot (the float-a-vore?)
>
> David Perry
> ____________________________________________
> I'm sure David sinceraly apologises if he
> insulted anyone, it won't happen again.
>
> ____________________________________________
>
>
____________________________________________
I'm sure David sinceraly apologises if he
insulted anyone, it won't happen again.

____________________________________________
____________________________________________
I'm sure David sinceraly apologises if he
insulted anyone, it won't happen again.

____________________________________________

------------------------------------------------------------------------
eGroup home: http://www.eGroups.com/group/alt-beam
http://www.eGroups.com - Simplifying group communications

Home