Alt-BEAM Archive
Message #02380
To: beam@corp.sgi.com
From: "victor tee" victortee@hotmail.com
Date: Fri, 16 Apr 1999 07:28:39 GMT
Subject: [alt-beam] Re: please HELP....5 motor walker(got it working!!)
Dear List;
Just want to say that I found out the problem...well it
seems that the pins 6/7 of the 4016 was FLOATING...that causes the
mcore led to lit up then dim alittle before the the process starts,
and then resets.I don't know why it was acting this way until the pins
from the 4016 is connected to the Nu.Well, still trying to cancel out
all that noise...hmm...need bigger caps!.Anyway, want to say THANKS to
all that reply to me personally and thru the list.Yes..its
walking!..it's alive..it's alive!!So much satisfaction to see it
walk...so much fun!!Thanks again.
Victor Tee
======================================================
______________________________________________________
------------------------------------------------------------------------
eGroup home: http://www.eGroups.com/list/alt-beam
Free Web-based e-mail groups by eGroups.com
Home