Alt-BEAM Archive
Message #02049
To: synet@psynet.net
From: Mike Kulesza, mikekulesza@hotmail.com
Date: 04/05 4:53 PM
Subject: [alt-beam] Fwd: h-bridge
Hey Ian!
My microcore works fine, but when I attach the h-bridge to it, and try
to set it to the stable 1 process mode, it keeps reseting itself. Again,
the microcore works fine all by itself with no driver - it remains in
the 1 process state when set. I rebuilt the h-bridge numerous times but
the problem persists. What gives?
Whats the PIN (input to +ve)for on the microcore circuit? Does the fact
that i only have a PNC (input to ground) and no PIN have to do with the
problem?
----------------- End Forwarded Message -----------------
*-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-*
Ian Bernstein "aka - Synet" The Master Builder
E-Mail - Ian@beam-online.com
BEAM Online - http://www.beam-online.com
Quote - "Programming today is a race between software engineers
striving to build bigger and better idiot-proof programs, and the
Universe trying to produce bigger and better idiots. So far, the Universe
is winning."
- Rich Cook
------------------------------------------------------------------------
eGroup home: http://www.eGroups.com/list/alt-beam
Free Web-based e-mail groups by eGroups.com
Home