Alt-BEAM Archive
Message #00736
To: beam beam@corp.sgi.com
From: Richard Piotter richfile@rconnect.com
Date: Sun, 21 Feb 1999 14:10:19 -0600
Subject: [alt-beam] Re: I found some geared Motors, will they work?
I'd leave the brass pulley, cause it gives you a surcface to solder legs to. If
you use cloths hangar wire (sand the part to be joined), you should have no
trouble soldering it to the actual brass pulley.
Noam Rudnick wrote:
>
> Are you *sure* you don't mean centimeters?
>
> ----------
> > From: zeroheroz
> > To: beam@corp.sgi.com
> > Subject: I found some geared Motors, will they work?
> > Date: Sunday, February 21, 1999 1:58 PM
> >
> > I was at the local etectronics surplus store yesterday and
> > found geared motors and was wondering if they are suitable
> > for a beam walker. The motors are made by namiki. They
> > are aprox. 1 mm dia. & 2mm long. The gear box is aprox.
> > 1/2 mm thick and 3 mm long. The gears are brass. When I
> > hooked them up to a battery they turned very slow and had
> > plenty of torque. When the motor and gearbox are assembled
> > it looks like an L. Any info about these motors would be
> > appreciated. Thanks....... Zero
> > PS There is a brass pully on the shaft. What is the best
> > way to remove it?
--
Richard Piotter
richfile@rconnect.com
The Richfiles Robotics & TI web page:
http://members.xoom.com/richfiles
------------------------------------------------------------------------
eGroup home: http://www.eGroups.com/list/alt-beam
Free Web-based e-mail groups by eGroups.com
Home